Repair kit for vortex damper drive Opel Z19DTH Z19DTJ 55210201

Diesel-powered vehicles are very popular among motorists. The reason for this is not only increased safety, but also economy, since engines can run on diesel fuel 1.5 times longer. Plus, the cost of 95th gasoline is higher than diesel.

As we know, any mechanism can fail at the most inopportune moment. A common breakdown of the internal combustion engine is the failure of the swirl flap holders. As a result, the traction of the car weakens.

Common signs of such a breakdown can be the following signs:

• There are rattling sounds when the motor is running.
• There is a sharp increase in fuel consumption.
• There is a deterioration in the dynamic characteristics of vehicles.

What will be the consequences of ignoring this problem? Directly to the destruction of the engine itself. Due to the ingress of copious amounts of dust into the motor and the huge load due to the increase in air, serious breakdowns are inevitable.

Opel car manufacturers (Z19DTH Z19DTJ) offer to replace the entire structure to eliminate this malfunction, which causes dissatisfaction among many car owners. And this is logical, because the new system is many times more expensive. Thus, the owner of the vehicle overpays for unnecessary components.

Our company took care of this and launched the production and sale of such spare parts by the piece, which you can purchase in this online store. In the manufacture, we use high-strength materials that are resistant to temperature extremes and the effects of oily liquids.

This swirl flap drive kit (55210201) is designed for the following vehicle brands (diesel engines only):

• Opel - z19dth (1.9 cdti 16v 150hp), z19dtj (1.9 cdti 16v 120hp);
• SAAB - z19dth (1.9 cdti 16v 150hp);
• Fiat - 939A200 (1.9 MULTIJET jtdm 16v 150hp);
• Cadillac - z19dth (1.9 cdti 16v 150hp);
• Alfa Romeo - 939A200 (1.9 MULTIJET jtdm 16v 150hp).

Why buy this repair kit

For the production of these parts, a durable material - brass - was used. While factory elements are initially made of brittle and splitting material. Therefore, it makes absolutely no sense to buy and install a new intake manifold, because soon you will have to change the holders again. Using our repair kit, you will not only save money, but also simplify your work and forget about this problem for a long time.

The algorithm for installing such elements:

1. Remove broken parts.
   
2. Make a deepening of the holes (you can use a drill with a countersink).
3. Install and fix the holder bar. You need to make a chamfer in the second hole on the right side.
4. Install new holders from this repair kit.
5. Attach the bracket to the intake manifold.

Do you have any questions? Call our consultant managers, and they will be happy to give advice, help you choose the necessary parts and kits, and answer your questions.