Complete repair kit of the transfer case servo motor BMW 27102413711

Breakdown of the BMW distributor gear

Cars with a 4x4 wheel formula are famous for their reliability and cross-country ability. But they also have certain vulnerable elements. So, after 150 thousand kilometers of mileage, problems may arise with the gear of the distribution of four-wheel drive BMWs.

Many car owners are used to the fact that servo repair is always expensive. But with us you can save money by replacing only damaged items. The secret is that many car service stations change the entire servo motor, and then sell serviceable elements. Of course, installing a new node will be completely expensive.

How to fix a gear without high costs?

Buying from us a repair kit for the BMW transfer case servo motor, including only the necessary spare parts, you will save a decent amount. We produce plastic gears that are completely identical to the original ones. At the same time, the cost of such a node may surprise you.

You can replace the damaged element on the servo 27107566296 or any other one yourself. To do this, you will need to follow a simple sequence of actions:

1.     Unscrew the 4 bolts holding the servo on the transfer case.

2.     Carefully remove it so as not to catch the surrounding parts and preserve the thread.

3.     Drill a small hole (not through) on the border of the cover of the large oil seal and the housing to pry it.

4.     Take an awl or a thin screwdriver and lift this element. Carefully remove the lid and the large oil seal.

5.     Remove the stopper from the axle. Pull out the two old gears assembled with a washer and a small oil seal.

6.     Lubricate the screw and the axle. This is necessary to prevent further breakdowns.

7.     Unpack the BMW distributor repair kit. Take out the gear and related elements and carefully lay them out. This will make it easier to navigate the details.

8.     Connect the upper gear to the lower gear. They fit tightly on top of each other. They should be combined until a characteristic click.

9.     Put the gears on the axle. At the same time, all touching parts should be intensively lubricated.

10.    Put a washer on the gears, and a locking ring on it.

After installing all the elements, be sure to connect to the control unit and calibrate the operation of the servo 27107541782 or another model.

Gears of our production are suitable not only for BMW repair, but also for Land Rover Discovery LR3 and LR4, Range Rover Sport, Mercedes-Benz GL and ML, as well as some Bosch products.

We will be happy to help you. Order gears for servomotors to save money and get high-quality components!