Intake Manifold Flap Diaphragm VAG 2.0L 06B133619A

Many Volkswagen and Audi owners are faced with a situation when the membrane of the vacuum drive of the intake manifold dampers fails. You can buy a new part assembly, but it's not a very cheap pleasure. In addition, at the auto repair shop, you will still be charged money for replacing this part. The fault of this breakdown is the failure of the vw collector membrane.
The material from which the volkswagen collector membrane is made is rubber, during operation, and just from time to time, it dries and breaks. This leads to the fact that due to a hole in the intake manifold membrane of vw, the vacuum drive ceases to function, in addition, unaccounted air is sucked into the engine through a torn membrane, which increases fuel consumption.
If you have a little experience in repairing cars, then you may well save money and replace the volkswagen intake manifold membrane yourself.
First of all, you need to check the status of this node. For this purpose, you will need a flat screwdriver. With its help, the decorative panel is removed, under which the collector membrane is mounted. When disassembling the valve, do not lose the spring. The new membrane of the intake manifold should be carefully installed in place of the old one, making sure that the part stands up smoothly. It is worth noting that automakers do not sell membranes separately from the lid. Our company has established the release of this node, and you can purchase it if necessary.

This membrane is suitable for Audi and VW cars 06B133619A, 06B133619C. D = 73mm

• 2.0  - ALT, AZM, AXW, BLX, BLR, BLY, BVX, BVY, BVZ, BLX, BMB