Crankcase Gas Ventilation Valve for BMW N20 and N26 11127588412

Crankcase ventilation valve for BMW N20 11127588412 engines.

Used on BMW models:

• 1' F20, F20 LCI, F21, F21 LCI

• 2' F22, F23

• 3' F30, F30 LCI, F31, F31 LCI, F34 GT, F35, F35 LCI

• 4' F32, F33, F36 Gran Coupé

• 5' F07 GT LCI, F10, F10 LCI, F11, F11 LCI, F18, F18 LCI

• X1 E84

• X3 F25

• X4 F26

• X5 F15

• X6 F16

• Z4 E89

KVKG for BMW N20

The dark side of the coin for the N20 was the valve cover. Its malfunction causes a violation of crankcase ventilation. As a result, air enters the engine, which is not taken into account by the mass flow sensor.

As a result of such violations, the following problems may appear:

• ignition failure;
• engine malfunctions (especially at idle);
• increased oil and fuel consumption;
  

Valve cover for ventilation of valve gases (KVKG) BMW N20 fails due to the membrane. Over time, it very often just crumbles and breaks.

For many car owners, the breakdown of such a small element becomes a real problem. The fact is that the manufacturer does not produce individual elements to replace the membrane. According to the calculations of marketers, car owners will buy the entire valve cover of the engine.

But we have found a solution to this problem. You can buy a repair kit for BMW N20 from us. It consists of a diaphragm and a valve cap, completely similar in size and structure to the original spare parts.

How to use the repair kit?

Troubleshooting is very easy. To do this, remove the old valve cap. If it is melted or stuck, you can dismantle it piece by piece, because our kit has the same spare element. After that, remove the old membrane and install a new one. At the same time, make sure that the spring is in place. Close the valve with the lid and start the engine.

At the same time, it is necessary to take into account a number of features. So, after starting the motor, small malfunctions may occur in its operation. This is a normal process, because the electronic engine control unit read information about an excess of oxygen from lambda probes and adjusted fuel cards in accordance with these conditions.

After installing a new and serviceable valve diaphragm KVKG BMW N20, you need to wait until the data is updated and the ECU will set the system to normal operation.

Order a repair kit right now! The part number is 11127588412.