Electric handbrake motor BMW X5 E70, X6 E71 34436850289

It so happens that the handbrakes of BMW X5 E70 and X6 E71 cars cease to function correctly. This is not due to the poor quality of the original block, but due to natural wear and tear. When such a problem occurs, “P” appears on the display, the car either cannot be put on the handbrake, or it is blocked so that it cannot be removed from it. In the second case, unlocking can be done by using the emergency key that comes with the car from the factory.

But the problem does not disappear in this way, the state of the handbrake remains faulty. And the main reason is the parking brake control system. To determine what exactly needs to be done, you should understand its structure. The handbrake block has an electric motor that tightens and releases the brake cables. And one of the most common factors affecting the failure of the entire handbrake is a breakdown of the gear motor. There can be many reasons for this - ranging from problems with bearings and brush wear, to water entering the system.

A complete replacement of the entire unit is quite expensive, because its cost can reach $ 500 and more. If only the motor 34436850289 failed in a BMW X5 E70 or X6 E71 car, then you can only replace it, then the handbrake will again function like new.

By placing an order directly on the website of the KLIFEX manufacturing company or by contacting the managers of the online store using the contact details indicated on the resource, you can purchase this part separately and then replace it with your own hands.

How to remove the lock from the handbrake yourself?

1. You need to find a special key that was in the standard tool kit.
2. Find the emergency release cable, which is located in the trunk, on its left side, near the lamp.
3. Attach the wrench to the cable and pull until a click is heard.

Number of blocks with which this motor can be used: 34436850289. Old numbers: 34436785487, 34436796072, 34436782205, 34436788968, 34436788556, 34436779451.